Mögliche Lösung für den "Red Screen" ??

[helloworld]

Nur mal zur info:

Ich werde die Tage den Flash Speicher auslöten, da es aber leider nur sehr wenige Programmiergeräte gibt die solch einen Chip mit 56Pins auslesen und beschreiben können, wird es wohl noch einige Zeit in anspruch nehmen bis ich zu einem Ergebniss gekommen bin.

Ich werde mich hier natürlich melden sobald ich Neuigkeiten habe.

Gruß

[Bastelfront]

Red Screen is back - hab ja gesagt, dass ich bestimmt zu verbastelt gewesen bin..

Ich vermute sehr stark dass der Stecker meiner Red Screen beim update 3.30 gekappt wurde..
bevor ich iwas auslöte probier ich jetzt erstmal auf ne Vorgängerversion zu kommen..

Beim 3.50 Redscreen und anschliessendem Downgrade hats doch bei dem Link den ich gepostet habe auch geklappt

[Takeshi]

Das hatten wir doch schon durch. Das hat ne ganz andere Ursache, da ist was beim Downgraden schief gegangen. Der normale Red Screen kommt aber nicht bei einem Update, der kommt einfach so.

[Bastelfront]

Wie krieg ich jetzt die Konsole auf 3.15? Geht garnicht oder was?

[cipher]

Hab nur kurz mal ne frage wenn man den psgroove oder den downgrade ausführt auf einer red screen konsole was tut sich dann genau. Zeigt der psgroove die bei euch die Indikation für das es funktioniert hat. Ich glaub es sollte irgendeine LED leuchten. Und bei downgrade tut sich da was ? Ich weiß dass der red screen nachher noch da ist aber wird versucht die konsole downzugraden und welche version wird nach dem downgrade angezeigt im recovery menü.

Danke

[Bastelfront]

in den Service Mode direkt kommt man leider net - die Game OS der Red Screen hab ich in keiner Form zu sehen bekommen. der Downgrade scheint aber normal durchzulaufen... Sprich die 'Punkte 1 - 9 des Downgradevorgangs laufen normal ab... nur bei punkt 10 --> der 1. Start wirds wieder Redscreen.
Hier mal meine LOG Datei, die der USB stick hinterher ausgespuckt hat:

manufacturing updating start
PackageName = /dev_usb000/PS3UPDAT.PUP
settle polling interval success
vflash is enabled...
creating system regions...
create storage region: (region id = 1)
create storage region: (region id = 2)
format partition: (region_id = 2, CELL_FS_UTILITY:HDD0, CELL_FS_UFS)
create storage region: (region id = 3)
format partition: (region_id = 3, CELL_FS_UTILITY:HDD1, CELL_FS_FAT)
creating system regions done.
boot from nor flash...
creating nor flash regions...
create storage region: (region id = 2)
create storage region: (region id = 3)
creating flash regions...
create storage region: (region id = 1)
create storage region: (region id = 2)
format partition: (region_id = 2, CELL_FS_IOS:BUILTIN_FLSH1, CELL_FS_FAT)
create storage region: (region id = 3)
format partition: (region_id = 3, CELL_FS_IOS:BUILTIN_FLSH2, CELL_FS_FAT)
create storage region: (region id = 4)
format partition: (region_id = 4, CELL_FS_IOS:BUILTIN_FLSH3, CELL_FS_FAT)
create storage region: (region id = 5)
create storage region: (region id = 6)
Initializing
taking a while...
start Updating Proccess
Initialize elapsed time = 52 msec
check UPL
Check UPL elapsed time = 69 msec
check Package Size
get package size elapsed time = 19 msec
start Updating Package
Update packages num = 30
Update packages total size = 162260220
Update Package Revoke list
read package revoke list package (576 bytes) elapsed = 22 msec
update package revoke list elapsed = 175 msec
Update Package Revoke list done(0x8002f000)
Update Core OS Package
read core os package (5182047 bytes) elapsed = 264 msec
update core os package elapsed = 79979 msec
Update Core OS Package done(0x8002f000)
Update VSH Package
sys_memory_container_create() success(id = 0xc0effffe)
Update VSH's package : 1/22
read vsh package (1847 bytes) elapsed = 3 msec
decrypt and verify vsh package elapsed = 43 msec
write vsh package elapsed = 124 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 32 msec
Update VSH's package : 2/22
read vsh package (4779244 bytes) elapsed = 240 msec
decrypt and verify vsh package elapsed = 322 msec
write vsh package elapsed = 503 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 399 msec
Update VSH's package : 3/22
read vsh package (1927089 bytes) elapsed = 98 msec
decrypt and verify vsh package elapsed = 147 msec
write vsh package elapsed = 163 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 246 msec
Update VSH's package : 4/22
read vsh package (5498561 bytes) elapsed = 278 msec
decrypt and verify vsh package elapsed = 361 msec
write vsh package elapsed = 807 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 434 msec
Update VSH's package : 5/22
read vsh package (2010269 bytes) elapsed = 106 msec
decrypt and verify vsh package elapsed = 152 msec
write vsh package elapsed = 261 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 166 msec
Update VSH's package : 6/22
read vsh package (25242 bytes) elapsed = 9 msec
decrypt and verify vsh package elapsed = 45 msec
write vsh package elapsed = 93 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 57 msec
Update VSH's package : 7/22
read vsh package (7663270 bytes) elapsed = 391 msec
decrypt and verify vsh package elapsed = 410 msec
write vsh package elapsed = 2179 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 545 msec
Update VSH's package : 8/22
read vsh package (10258879 bytes) elapsed = 524 msec
decrypt and verify vsh package elapsed = 303 msec
write vsh package elapsed = 2797 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 534 msec
Update VSH's package : 9/22
read vsh package (8773195 bytes) elapsed = 447 msec
decrypt and verify vsh package elapsed = 258 msec
write vsh package elapsed = 1720 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 425 msec
Update VSH's package : 10/22
read vsh package (8827678 bytes) elapsed = 452 msec
decrypt and verify vsh package elapsed = 339 msec
write vsh package elapsed = 1592 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 563 msec
Update VSH's package : 11/22
read vsh package (6182668 bytes) elapsed = 320 msec
decrypt and verify vsh package elapsed = 223 msec
write vsh package elapsed = 372 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 431 msec
Update VSH's package : 12/22
read vsh package (10251215 bytes) elapsed = 527 msec
decrypt and verify vsh package elapsed = 274 msec
write vsh package elapsed = 854 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 534 msec
Update VSH's package : 13/22
read vsh package (10187344 bytes) elapsed = 521 msec
decrypt and verify vsh package elapsed = 280 msec
write vsh package elapsed = 1289 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 526 msec
Update VSH's package : 14/22
read vsh package (10381187 bytes) elapsed = 532 msec
decrypt and verify vsh package elapsed = 281 msec
write vsh package elapsed = 1284 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 460 msec
Update VSH's package : 15/22
read vsh package (9899962 bytes) elapsed = 510 msec
decrypt and verify vsh package elapsed = 280 msec
write vsh package elapsed = 1572 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 465 msec
Update VSH's package : 16/22
read vsh package (8210627 bytes) elapsed = 429 msec
decrypt and verify vsh package elapsed = 224 msec
write vsh package elapsed = 1321 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 426 msec
Update VSH's package : 17/22
read vsh package (10382360 bytes) elapsed = 560 msec
decrypt and verify vsh package elapsed = 287 msec
write vsh package elapsed = 1750 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 543 msec
Update VSH's package : 18/22
read vsh package (9649989 bytes) elapsed = 500 msec
decrypt and verify vsh package elapsed = 389 msec
write vsh package elapsed = 7800 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 1677 msec
Update VSH's package : 19/22
read vsh package (7751745 bytes) elapsed = 409 msec
decrypt and verify vsh package elapsed = 371 msec
write vsh package elapsed = 5363 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 1089 msec
Update VSH's package : 20/22
read vsh package (8165430 bytes) elapsed = 426 msec
decrypt and verify vsh package elapsed = 385 msec
write vsh package elapsed = 3342 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 1118 msec
Update VSH's package : 21/22
read vsh package (8287111 bytes) elapsed = 434 msec
decrypt and verify vsh package elapsed = 369 msec
write vsh package elapsed = 5361 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 1193 msec
Update VSH's package : 22/22
read vsh package (5315230 bytes) elapsed = 293 msec
decrypt and verify vsh package elapsed = 241 msec
write vsh package elapsed = 440 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 457 msec
Update VSH Package done(0x8002f000)
Bul-ray Disc Player Revoke
read bdp revoke package (1905 bytes) elapsed = 23 msec
decrypt and verify bdp revoke package elapsed = 49 msec
write bdp revoke package elapsed = 55 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare bdprevoke package elapsed = 132 msec
Bul-ray Disc Player Revoke done(0x8002f000)
Update Program Revoke list
read program revoke list package (736 bytes) elapsed = 22 msec
update program revoke list elapsed = 4468 msec
Update Program Revoke list done(0x8002f000)
Update BD firmware
read BD firmware package (1966992 bytes) elapsed = 102 msec
update BD firmware elapsed = 288 msec
read BD firmware package (951040 bytes) elapsed = 48 msec
update BD firmware elapsed = 248 msec
read BD firmware package (951040 bytes) elapsed = 49 msec
update BD firmware elapsed = 247 msec
read BD firmware package (951040 bytes) elapsed = 49 msec
update BD firmware elapsed = 245 msec
read BD firmware package (1639296 bytes) elapsed = 84 msec
update BD firmware elapsed = 256 msec
read BD firmware package (787200 bytes) elapsed = 41 msec
update BD firmware elapsed = 244 msec
read BD firmware package (1639296 bytes) elapsed = 84 msec
update BD firmware elapsed = 264 msec
Update BD firmware done(0x8002f000)
Update Multi-Card controller firmware
read MCC package (28636 bytes) elapsed = 22 msec
update MCC elapsed = 44 msec
Update Multi-Card controller firmware done(0x8002f000)
Update BlueTooth firmware
read BT package (644322 bytes) elapsed = 37 msec
update BT elapsed = 76 msec
Update BlueTooth firmware done(0x8002f000)
Update System controller firmware
read SC patch package (4864 bytes) elapsed = 20 msec
read SC patch package (4864 bytes) elapsed = 22 msec
read SC patch package (4864 bytes) elapsed = 22 msec
read SC patch package (4864 bytes) elapsed = 23 msec
read SC patch package (4864 bytes) elapsed = 23 msec
read SC patch package (4864 bytes) elapsed = 22 msec
read SC patch package (4864 bytes) elapsed = 22 msec
read SC patch package (4864 bytes) elapsed = 22 msec
Update System controller firmware done(0x8002f000)
update package elapsed time = 156980 msec
post processiong...
post processiong done
cleanup update status (ret = 0)
os version = 03.4100
build_version = 45039,20100721
region of core os package = 0x40000000
build_target = CEX-ww
build target id = 0x83
manufacturing updating SUCCESS(0x8002f000)
set product mode (ret = 0)
Total Elapsed time = 168240 msec

[Bastelfront]

So und das ganze nochma auf 3.15

manufacturing updating start
PackageName = /dev_usb000/PS3UPDAT.PUP
settle polling interval success
vflash is enabled...
creating system regions...
create storage region: (region id = 1)
create storage region: (region id = 2)
format partition: (region_id = 2, CELL_FS_UTILITY:HDD0, CELL_FS_UFS)
create storage region: (region id = 3)
format partition: (region_id = 3, CELL_FS_UTILITY:HDD1, CELL_FS_FAT)
creating system regions done.
boot from nor flash...
creating nor flash regions...
create storage region: (region id = 2)
create storage region: (region id = 3)
creating flash regions...
create storage region: (region id = 1)
create storage region: (region id = 2)
format partition: (region_id = 2, CELL_FS_IOS:BUILTIN_FLSH1, CELL_FS_FAT)
create storage region: (region id = 3)
format partition: (region_id = 3, CELL_FS_IOS:BUILTIN_FLSH2, CELL_FS_FAT)
create storage region: (region id = 4)
format partition: (region_id = 4, CELL_FS_IOS:BUILTIN_FLSH3, CELL_FS_FAT)
create storage region: (region id = 5)
create storage region: (region id = 6)
Initializing
taking a while...
start Updating Proccess
Initialize elapsed time = 47 msec
check UPL
Check UPL elapsed time = 50 msec
check Package Size
get package size elapsed time = 16 msec
start Updating Package
Update packages num = 29
Update packages total size = 160699026
Update Package Revoke list
read package revoke list package (576 bytes) elapsed = 2 msec
update package revoke list elapsed = 173 msec
Update Package Revoke list done(0x8002f000)
Update Core OS Package
read core os package (5193774 bytes) elapsed = 264 msec
update core os package elapsed = 73088 msec
Update Core OS Package done(0x8002f000)
Update VSH Package
sys_memory_container_create() success(id = 0xc0effffe)
Update VSH's package : 1/21
read vsh package (2070 bytes) elapsed = 2 msec
decrypt and verify vsh package elapsed = 43 msec
write vsh package elapsed = 139 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 33 msec
Update VSH's package : 2/21
read vsh package (5616383 bytes) elapsed = 287 msec
decrypt and verify vsh package elapsed = 365 msec
write vsh package elapsed = 335 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 454 msec
Update VSH's package : 3/21
read vsh package (3357780 bytes) elapsed = 172 msec
decrypt and verify vsh package elapsed = 249 msec
write vsh package elapsed = 713 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 304 msec
Update VSH's package : 4/21
read vsh package (5240122 bytes) elapsed = 265 msec
decrypt and verify vsh package elapsed = 333 msec
write vsh package elapsed = 562 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 490 msec
Update VSH's package : 5/21
read vsh package (24029 bytes) elapsed = 4 msec
decrypt and verify vsh package elapsed = 44 msec
write vsh package elapsed = 96 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 79 msec
Update VSH's package : 6/21
read vsh package (9831317 bytes) elapsed = 532 msec
decrypt and verify vsh package elapsed = 308 msec
write vsh package elapsed = 2644 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 514 msec
Update VSH's package : 7/21
read vsh package (8662380 bytes) elapsed = 444 msec
decrypt and verify vsh package elapsed = 298 msec
write vsh package elapsed = 2430 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 583 msec
Update VSH's package : 8/21
read vsh package (8657372 bytes) elapsed = 444 msec
decrypt and verify vsh package elapsed = 387 msec
write vsh package elapsed = 1299 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 494 msec
Update VSH's package : 9/21
read vsh package (10445426 bytes) elapsed = 536 msec
decrypt and verify vsh package elapsed = 282 msec
write vsh package elapsed = 1425 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 555 msec
Update VSH's package : 10/21
read vsh package (10252830 bytes) elapsed = 523 msec
decrypt and verify vsh package elapsed = 290 msec
write vsh package elapsed = 2187 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 540 msec
Update VSH's package : 11/21
read vsh package (9922968 bytes) elapsed = 512 msec
decrypt and verify vsh package elapsed = 280 msec
write vsh package elapsed = 1473 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 497 msec
Update VSH's package : 12/21
read vsh package (8214459 bytes) elapsed = 425 msec
decrypt and verify vsh package elapsed = 224 msec
write vsh package elapsed = 1565 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 503 msec
Update VSH's package : 13/21
read vsh package (9428094 bytes) elapsed = 490 msec
decrypt and verify vsh package elapsed = 273 msec
write vsh package elapsed = 1308 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 520 msec
Update VSH's package : 14/21
read vsh package (7973335 bytes) elapsed = 416 msec
decrypt and verify vsh package elapsed = 372 msec
write vsh package elapsed = 2156 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 547 msec
Update VSH's package : 15/21
read vsh package (9766737 bytes) elapsed = 538 msec
decrypt and verify vsh package elapsed = 387 msec
write vsh package elapsed = 2605 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 562 msec
Update VSH's package : 16/21
read vsh package (9199234 bytes) elapsed = 479 msec
decrypt and verify vsh package elapsed = 435 msec
write vsh package elapsed = 5179 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 919 msec
Update VSH's package : 17/21
read vsh package (7260896 bytes) elapsed = 405 msec
decrypt and verify vsh package elapsed = 312 msec
write vsh package elapsed = 4667 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 1023 msec
Update VSH's package : 18/21
read vsh package (6563380 bytes) elapsed = 346 msec
decrypt and verify vsh package elapsed = 180 msec
write vsh package elapsed = 499 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 431 msec
Update VSH's package : 19/21
read vsh package (6092245 bytes) elapsed = 325 msec
decrypt and verify vsh package elapsed = 252 msec
write vsh package elapsed = 300 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 435 msec
Update VSH's package : 20/21
read vsh package (9859067 bytes) elapsed = 513 msec
decrypt and verify vsh package elapsed = 265 msec
write vsh package elapsed = 433 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 488 msec
Update VSH's package : 21/21
read vsh package (6492084 bytes) elapsed = 347 msec
decrypt and verify vsh package elapsed = 346 msec
write vsh package elapsed = 3948 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 1063 msec
Update VSH Package done(0x8002f000)
Bul-ray Disc Player Revoke
read bdp revoke package (1904 bytes) elapsed = 20 msec
decrypt and verify bdp revoke package elapsed = 49 msec
write bdp revoke package elapsed = 56 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare bdprevoke package elapsed = 127 msec
Bul-ray Disc Player Revoke done(0x8002f000)
Update Program Revoke list
read program revoke list package (704 bytes) elapsed = 5 msec
update program revoke list elapsed = 4517 msec
Update Program Revoke list done(0x8002f000)
Update BD firmware
read BD firmware package (1966992 bytes) elapsed = 115 msec
update BD firmware elapsed = 291 msec
read BD firmware package (951040 bytes) elapsed = 67 msec
update BD firmware elapsed = 250 msec
read BD firmware package (951040 bytes) elapsed = 69 msec
update BD firmware elapsed = 246 msec
read BD firmware package (951040 bytes) elapsed = 70 msec
update BD firmware elapsed = 247 msec
read BD firmware package (1639296 bytes) elapsed = 109 msec
update BD firmware elapsed = 260 msec
read BD firmware package (787200 bytes) elapsed = 61 msec
update BD firmware elapsed = 245 msec
Update BD firmware done(0x8002f000)
Update Multi-Card controller firmware
read MCC package (28636 bytes) elapsed = 23 msec
update MCC elapsed = 44 msec
Update Multi-Card controller firmware done(0x8002f000)
Update BlueTooth firmware
read BT package (639368 bytes) elapsed = 63 msec
update BT elapsed = 76 msec
Update BlueTooth firmware done(0x8002f000)
Update System controller firmware
read SC patch package (4864 bytes) elapsed = 22 msec
read SC patch package (4864 bytes) elapsed = 22 msec
read SC patch package (4864 bytes) elapsed = 22 msec
Update System controller firmware done(0x8002f000)
update package elapsed time = 142996 msec
post processiong...
post processiong done
cleanup update status (ret = 0)
os version = 03.1500
build_version = 38031,20091206
region of core os package = 0x40000000
build_target = CEX-ww
build target id = 0x83
manufacturing updating SUCCESS(0x8002f000)
set product mode (ret = 0)
Total Elapsed time = 154930 msec

[Bastelfront]

Manchmal sieht man für eine Millisekunde das GamOS booten, bevor der RedScreen zuschlägt.

Ich habe dasselbe SEM-001 Board noch als 2. Ausführung zu liegen. Ich weiß nicht ob der Flash fehlerhaft ist. Diese Konsole hat den spätesten YLOD den ich je gesehen habe (sie schaltet etwa ab wenn das 2. piepen beim VGA recovery kommt..

Ich werde trotzdem mal versuchen mit Hilfe von Takeshis Grafik schonma nach und nach Kabels dranzulöten.

[Takeshi]

Das v3 Board SEM-001 hat aber 2x den großen NAND Flash, die v6 den kleinen NOR Flash, das ist dir bewusst?

[cipher]

Oke ich denke das sieht ja mal garnicht so schlecht aus zumindest ist der Red Screen nicht in einem isolierten Zustand wo er garnichts macht. Er mounted zumindest den Usb stick und versucht dann downzugraden.

Aber wenn man dann ins Recovery Menu geht steht dann dort die Downgegradede Version oder noch die alte.??

Und beim psgroove leuchtet die LED (Indikation dass der Psgroove funktioniert hat)?

Ich versuch gerade einen Payload so abzuändern dass er automatisch den /dev_flash auf /dev_usb abändert was aber wahrscheinlich das problem ist, ist dass der andere usb stick gemounted werden muss bevor er das remapping macht. Dann müsste es möglich sein die Firmware vom usb zu starten.

Ist jetzt keine langfristige lösung, da ist sicher der flash tausch die bessere variante. Aber ich würd mal gerne sehen ob das überhaupt funktioniert

[helloworld]

Bei der V6 gibt es keinen NAND 

@ Bastelfront

Du kannst Downgraden bis du schwarz wirst, den Grund dafür findest Du in der 12 Zeile deiner LOG Datei....

[cipher]

Oke na wie du glaubst mal schauen ich hab zwar schon etwas erfahrung mit assembler und c programmierung aber die ppc architektur ist neu darum tue ich mir etwas schwerer. Mal gucken was rauskommt ich hab nie gesagt dass es sooo einfach ist natürlich muss man etwas zeit investieren.

Die Custom Firmware lässt sich auch so vom usb stick laden ohne einen backup von dem eigenen Flash zu haben da gibt es ein eigenes tutorial.

[cipher]

mal sehen vl. stell ich mir das alles zu einfach vor man wird sehen man macht Fehler lernt daraus aber man lernt auch das system kennen also schaden kann es nicht!

[Bastelfront]

ich krieg krebs bei den ganzen versionen..

Recovery menü funktioniert übrigens auch nicht mehr .. Da schaltet se ab

[cipher]

@bastelfront du hast schon einiges mit dem psgroove probiert weißt du oder könntest du probieren ob der psgroove auf deiner red screen konsole funktioniert aber wenn zusätzlich noch ein anderer usb stick in der konsole hängt?