28/08/2012 RGH1 technical note on "DUAL NAND"
Until dashboard 14699 is possible to install the RGH1 bitstream, later is necessary RGH2.0.
OF course try to install a dual nand with RGH1 is unless, because then you cannot update original dash to the new dashboards.
The RGH2.0 bitstreams (availables in support area) are able to work in DUAL NAND MODE only with QSB DUAL NAND PHAT or
with a phisical switch.

03/04/2012 FAT FIRMWARES "ALLINONE" !
Please report bugs to info@squirt360.com

Added OPUS, XENON bistreams!! 

News in this version:

1- Important! The new bitstream work better if you bridge SLIM PAD instead FAT PAD like normal. The different voltage help a better glitch
2- Added on the bitstream the notification of the NAND SELECTION by blinking the POWER LED on the console. 
When the SYNC button is pressed in standby, the chip will switch to primary nand and the led will light up. To go back to secondary nand, turn the console on and off again.
3- We suggest also to enable 220pF on board for a better glitch

Note: to use the bitstream with standard RGH (no dual nand) pls. bridge VCC with SYNC PAD 

