Themen

Hello everybody!

I'm a user since 2010, but in the  last 2 years I left the electronics repair due to job in programing. Now I decided come back and try to repair my PS3 consoles. Currently I have a small console's collection. In this collection I have 5 PS3 fat models, all of them have problems and I wanna a help to try fix them. Below have the model of PS3 and a small description of your error:

CECHE01: It had YLOD when I bought, I've made a reflow and it worked, but after months the YLOD has reappeared. When the PS3 turns on, the fan spins, the Digital out (Optical) blinks and the PS3 emits 3 bips. Both Cell and RSX are cold;

CECHH12: It overheated and now it's dead;

CECHA01: When I bought, it turns on and after 20 seconds turns off due overheating. I decided remove the IHS and after this the PS3 got a YLOD(or BSJF). When I turn it on the Digital out ( optical) lights and the green led of network connection lights, fan spins, shortly thereafter the PS3 have 3 bips. The cell gets hot and the RSX is slightly heated;

CECHC03: The unique that works partly. When I bought it has artefacts on the image and shortly thereafter it has a black screen and the controller doesnt work. Everytime that I make a reflow the PS3 works normally, but hours after the black screen come back;

CECHB00: It has a YLOD. When I turn on the PS3 the Digital out blinks weakly, the fan spins and the PS3 have 3 bips. Both Cell and RSX are cold.

I found a brazilian project that consist in make a reballing machine with infrared lamps. Do you know another similar project?

Hello everybody!

I bought another PS3 fat (CECHC03) defective. I like the FAT models because are more elegant! It's my fourth PS3 FAT.

The PS3 has the following problems:
Dualshock does not synchronize;
No image (black screen - no signal) in HDMI and component video outputs;

CELL and RSX heats normally.

The motherboard is in the perfect condition. All the PS fuses are OK.

When I hold the power button, the PS3 emits a beep (reset video) and after more 2 beeps(recovery mode), but I can`t do anything.

It seems that the PS3 is brick, the previous owner could not tell which firmware installed, but it seems to be 3.55 or earlier.

The PS3 never was unlocked and appears to have taken a fall.

Hello to all Trisaster's participants! This is my second post and I wrote in English because I not  speak German!

I bought a CECHA01 with he following defect, after 2 minutes the cooler reached the last level and the PS3 shutdown without display any message error, I tried changing  the thermal paste  over the RSX IHS, but the defect remained.

Then I decided to remove the IHS, and to my surprise the older owner had already removed and changed the internal thermal paste, but the older owner pasted the IHS with instant glue, then the central part of the RSX not touched the IHS. Carefully I removed the IHS and removed all the glue residue, but after reassemble the PS3 I got YLOD, I tried 3 reflows with heat gun but without sucess.

Turn on the PS3 several times the CELL gets hot and the RSX a little warm.

What can I do? Does the RSX was damaged or was crack in the BGA?

Hallo allerseits, ich bin Brasilianer, ich bin neu im Forum und nicht Deutsch sprechen, dann verwende ich Google Übersetzer, um mit Ihnen zu kommunizieren.

Die PS3 gefangen hat, während des Neustarts nicht lesen etwas anderes, wenn Sie den Treiber realisiert offen, dass die KEM-410 emittiert sehr schwachen Laser Blu-ray und nicht strahlen die Laser für CD und DVD.

Ich überprüfte die BD7800 und es funktioniert. Die Karten-Treiber ist möglicherweise defekt oder KEM-410 ist defekt?

Vielen Dank für Ihre Aufmerksamkeit